Hitachi SERIES F, 210-208 manual Fire And Explosion Hazard, Toxic Fluid Hazard

Page 4
FIRE AND EXPLOSION HAZARD

TOXIC FLUID HAZARD WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray/dispense area free of debris, including solvent, rags, and gasoline.

DBefore operating this equipment, electrically disconnect all equipment in the spray/dispense area.

DBefore operating this equipment, extinguish all open flames or pilot lights in the spray/dispense area.

DDo not smoke in the spray/dispense area.

DDo not turn on or off any light switch in the spray/dispense area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray/dispense area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

43￿8￿￿43

Image 4
Contents INSTRUCTIONS-PARTSLIST Model 210-208,Series FRev. F Supersedes Rev. C and PCN D READ AND KEEP FOR REFERENCETable of Contents SymbolsWarning Symbol Caution SymbolWRNING INJECTION HAZARDcal attention MOVING PRTS HZRDFIRE AND EXPLOSION HAZARD TOXIC FLUID HAZARDSetup/Operation Pressure Relief ProcedureOperation General InformationService Disconnecting the Displacement PumpIntake Valve Fig Piston FigPISTON THROATService Reconnecting the Displacement Pump Check Valve AdjustmentThroat Packings Fig Service3843 Parts 24 38 32 †1836 15 16† 49 28 43 24 31 15 30 39 †47Technical Data Model 210-208,Series F Displacement PumpManual Change Summary Packing Conversion KitThe Graco Warranty and Disclaimers Graco Phone Numberyou 1-800-367-4023Toll Free WARRANTY