Insignia NS-PS113 manual Using the anti-shock feature, Playing the radio, To play the radio

NS-P5113_14-0988_MAN_V3_ENG.fm Page 11 Friday, September 5, 2014 12:56 PM

Insignia NS-P5113 Portable CD Player with FM

Using the anti-shock feature

When your CD player moves during playback (for example, when you are walking or in a moving vehicle), your player may be subject to bumps or vibrations.

When you press the / / POWER ON and MENU/PRESET/ESP buttons, the anti-shock feature turns on and ESP flashes on the display. The CD spins faster and your CD player stores the audio in memory to make sure that playback does not pause or skip.

If the memory buffer gets full, ESP stops flashing on the display. If your player is bumped or vibrated too much or the memory buffer is empty, the sound mutes for a short time. After the bumping or vibration stops, your player resumes normal playback.

Notes

You should use the anti-shock feature only when necessary. Using the anti-shock feature while your CD player is running on battery power uses additional battery power.

To turn off the anti-shock feature when playing an audio CD, press the MENU/ESP/PRESET button. You cannot turn off the anti-shock feature when playing an MP3 CD.

The anti-shock feature will not correct playback errors if the CD is scratched or dirty.

The ESP default is off.

Playing the radio

Note

The headphone cable is the FM antenna. For best reception, make sure that the cable is fully extended.

To play the radio:
1 Set the FUNCTION switch to RADIO, then press the	/ /
POWER ON button.

2Press the PLAY MODE button to select FM MONO or FM STEREO.

Note

If you select FM STEREO and the radio signal is weak, STEREO appears on the display. Press the PLAY MODE button to switch to FM MONO.

The audio plays in mono, but the background static is reduced.

3To turn off the radio, press and hold the / / POWER OFF button.

www.insigniaproducts.com11