Jcdwin, CD Operation | Jensen JCDWIN specification

JCDWIN

Automatically Store / Preset Scan (AS/PS, AMS)

CD OPERATION

Automatically Store

Select a band (if needed). Press the AS/PS button (16) on the control panel (or the AMS button on the remote control) for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band.

Preset Scan

Select a band (if needed). Press the AS/PS button (16) on the control panel (or the AMS button on the remote control) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached.

FM Mono Select (MONO)

During FM radio operation, the MONO button (7) is used to select monaural or stereo reception of the broadcast signal. Under normal reception conditions, the unit should be left in the stereo mode (indicated by the “ST” icon when tuned to an FM stereo signal). If the signal is too noisy for comfortable listening, press the MONO button on the control panel (or the MO button on the remote control). To return to stereo reception mode, press the MONO button again.

Insert and Eject Disc

Insert a disc, label-side up, with the unit turned on. “CDP PLAY” will display on the LCD for about 5 seconds and the unit will play the first track on the disc. Press the eject button (2) to stop disc play and eject the disc. The unit does not have to be turned on to eject the disc.

Controlling Disc Playback

Track Select

Press the TUNE up button (19) or TUNE down button (18) on the control panel for less than one second to advance to the next track on the CD. The selected track number will appear on the display. Press and hold the TUNE up button (19) or TUNE down button (18) for >1 second to fast forward or fast reverse through the disc. CD play starts when the button is released.

Play/Pause Disc Playback (1/>)

Press the 1/> button (9) to suspend disc play. Press the 1/> button again to resume disc Play.

Intro Scan (2/INT)

Press the 2/INT button (10) on the control panel to play the first 10 seconds of each track sequentially. Press 2/INT again to stop Intro Scan and resume normal play at the current track.

Repeat Play (3/RPT)

Press the 3/RPT button (11) during disc play to repeat play the current track. Press 3/RPT again to stop repeat play.

Random Play (4/SHF)

Press the 4/SHF button (12) on the control panel during disc play to play all tracks on a CD in random, shuffled order. Press 4/SHF again to stop random play.