CD PLAYER OPERATION
Note: This player not only plays commercial CDs but also plays
1.Set the Function/ Power Switch (# 19) to "CD" position. The player will display “-
2.Open the CD LID by pressing the CD OPEN Button (# 3). Carefully place an audio CD,
| with its label side upward, in the CD compartment and close the CD Door. | ||||||
3. | The total number of tracks on the CD will appear in the LCD Display (# 14) after | ||||||
| a few seconds. |
| Button (# 5). The CD PLAY Indicator “PLAY ” | ||||
4. | Press the CD PLAY/PAUSE |
| |||||
| will light and the CD will start playing from the first track. | ||||||
5. | Adjust the Volume Control (# 20) to obtain the desired sound level from | ||||||
| the |
|
|
|
|
|
|
6. | To suspend playing, press the CD PLAY/PAUSE |
|
| Button (# 5). | |||
| The CD PLAY Indicator “PLAY |
| ” will flash. |
|
|
| |
| To resume playing, press the CD PLAY/PAUSE |
|
|
| Button (# 5) again. | ||
|
|
|
| ||||
7.You can choose to play your favorite track directly by pressing either the CD Skip Forward 
Button (#10) or CD Skip Backward 
Button (#7).
The LCD Display (#14) will indicate the correct track number selected.
8.To locate a particular passage within a track, keep the CD Search Forward 
Button (#10) or
CD Search Back ward 
Button (#7) depressed until it is found.
9.To repeat a particular track, press the CD REPEAT Button (# 11) once or until the CD REPEAT Indicator “REPEAT” (# 8) lights.
10.To repeat the entire CD, press the CD REPEAT Button (# 11) twice or until the CD REPEAT Indicator “REPEAT ALL” (# 8,15) lights.
11.To stop playing, press the CD STOP 
Button (# 12).
12.When you wish to turn off the CD PLAYER, set the Function/Power Switch (# 19) to "TAPE".
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence.
1. In CD stop mode, press the PROGRAM Button (#16) once. The CD PROGRAM Indicator “PROGRAM” (# 13) will flash and “00” will appear and blink in the LCD Display (# 14) to prompt for input.
2. Press the CD Skip BACKWARD Button 
(#7) or CD Skip FORWARD Button (#10) to select the song to be programmed. For example track 8 is selected.
3. Press the PROGRAM Button (# 16) again to store the selection. The Program Channel No. will change to “00” and blink to prompt for Input.
4. Press the CD Skip Forward Button 
(#10) or CD Skip Backward Button 
(#7) to select the next song to be programmed and press the PROGRAM Button (#16) to store the selection. For example second selection is track 15.
5. You may repeat steps 2 - 4 to program as many as 20 tracks.
The LCD Display (#14) will display “-
6. Press the CD PLAY/PAUSE 
Button (# 5) to start playing in the programmed sequence. The PLAY lndicator "PLAY 
" appears with the PROGRAM lndicator, "PROGRAM", flashing in the Display.
7.Adjust the Volume Control (# 20) to obtain the desired sound level from the
8.To resume to normal playback, in CD Stop mode press the PLAY/PAUSE 
Button (#5) again.
9.When you wish to turn off the CD PLAYER, set the Function /Power Switch (# 19) to the "TAPE" position.
5