POWER SUPPLY
Batteries (supplied or optionally available)
You can use the following batteries with this
◆alkaline batteries type AA (LR6, UM3) or AAA (LR03, UM4).
◆PHILIPS rechargeable batteries, type AY3363
Inserting AA (LR6, UM3) batteries |
|
|
|
| |
1 | Open the battery compartment. |
|
|
|
|
2 | Insert 2 x AA batteries as shown into the battery | + | - | - | + |
| compartment. |
| |||
3 |
|
|
| ||
Close the battery compartment. |
|
|
|
| |
Inserting AAA (LR03, UM4) or AY 3363 batteries |
|
|
|
| |
1 Open the battery compartment. |
|
|
|
| |
2 Insert AAA batteries as shown onto the back of the AAA |
| LR03/AAA |
|
| |
| battery door. |
| /UM4 |
| |
3 Fit the AAA |
|
|
| ||
|
|
|
| ||
ment.
Helpful Hints:
–Old and new or different types of batteries should not be combined.
–Remove batteries if they are empty or if the player is not going to be used for a long time.
Battery indication
The battery level is shown in the display screen as follows:
Battery full
Battery
Battery |
|
Battery dead or empty. The display shows | and the |
beep tone sounds repeatedly. |
|
POWER SUPPLY
Average playing time of batteries under normal conditions
Battery type |
| Power Save |
| Audio CD |
|
Alkaline AA | 30 hours | 45 hours |
Alkaline AAA | 13 hours | 20 hours |
Charge cradle AY4105 (supplied or optionally available)
The AY4105 charge cradle can be used to charge batteries on board.
Recharging the
1Connecting AY4105 charge cradle:
•Make sure the local voltage corresponds to the the AC/ DC adapter’s voltage.
• Connect the AC/ DC adapter to the 4.5V DC jack of the charge cradle and to the wall outlet.
2Insert the rechargeable
AY3363:
• Check the batteries are correctly loaded.
3Mounting the CD player:
•Check that the player is switched off.
•As shown, 4 facing the charging indicator, carefully slot the player onto the charge cradle. Make sure you
align the player’s docking jack to the docking pins.
➜ The charging indicator lights up red (for charging on) and
charging starts. |
|
➜ The display shows: | . |
➜If the batteries become too warm, recharging will be interrupted for approximately 30 minutes and the dis-
play shows:
➜ When the batteries are fully recharged, the charging indicator turns green (for charging
appears in the display
POWER SUPPLY
Helpful Hint:
–Check that the player is switched off as it is not possible to charge batteries when the player is in use.
–It is normal for the batteries to become warm during recharging.
–To ensure proper recharging on the charge cradle, take care that contacts are clean.
–Use only the
Handling instructions
•Recharging already charged or
•To avoid a short circuit, do not let the battery touch any metal object.
•If the battery becomes empty soon after recharging, then either its contacts are dirty or it has reached the end of its lifetime.
Batteries contain chemical substances, so they should be disposed of properly
POWER SUPPLY
AC/DC adapter AY3162 (supplied or optionally available)
Only use AY3162 adapter (4.5V/450mA DC, positive pole to the center pin). Any other product may damage the player.
1Make sure the local voltage corresponds to the AC/ DC adapter’s voltage.
2Connect the AC/ DC adapter to the 4.5V DC jack of the player and to the wall outlet.
Helpful Hint:
–Always disconnect the adapter when you are not
using it.
–Apparatus shall not be exposed to dripping or splashing.
–Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles)
ENVIRONMENTAL INFORMATION
•All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two materials: cardboard (box) and polyethylene (bags, protective foam sheet).
•Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment.