AZ1080/00A 03/13/02 10:06 Page 11
Recording
4Close the cassette door.
5Press RECORD 0 to start recording.
•Playing of the CD starts automatically. It is not necessary to start the CD player separately.
6For brief interruptions press PAUSE ;.To resume recording, press PAUSE ; again.
7To stop recording, press STOP•OPEN 9/.
➜The CD player goes to pause mode. Press PLAY•PAUSE 2; to resume CD playback, or press STOP 9 to stop CD play.
Selecting and recording a particular passage
•During CD playback, press and hold down the SEARCH buttons ∞ or § on the set to find your passage.
•Press PLAY•PAUSE 2; to put the CD player on pause at the selected passage.
➜Recording will begin from this exact point in the track when you press RECORD 0.
Note: If you press RECORD 0 during playback, recording starts automatically from the beginning of the current track.
Recording from the Radio
1Adjust the source selector to MW or FM to select your desired waveband.
2Tune to the desired radio station (see Radio reception).
3Press STOP•OPEN 9/ to open the cassette door. Insert a blank tape.
4Close the cassette door.
5Press RECORD 0 to start recording.
6For brief interruptions, press PAUSE ;.To resume recording, press PAUSE ; again.
7To stop recording,
press STOP•OPEN 9/ .
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
English
11