Optimus SCP-100 owner manual Fm Page 8 Friday, July 2, 1999 1246 PM

14-1248.fm Page 8 Friday, July 2, 1999 12:46 PM

Cautions:

•The recommended AC adapter supplies 3 volts and delivers at least 250 milliamps. Its center tip is set to negative, and its barrel plug correctly fits the SCP-100’s DC 3V jack. Using an adapter that does not meet these specifications could dam- age the SCP-100 or the adapter.

•Always connect the adapter to the SCP-100’s DC 3V jack before you connect it to the AC outlet. Then disconnect the adapter from the AC outlet before disconnecting it from the SCP-100.

Follow these steps to power the SCP-100 from a standard AC outlet.

1.Set the adapter’s voltage switch to 3V.

2.Insert the adapter’s 3.4 mm outer diameter/1.3 mm inner diameter barrel plug into the adapter’s cord so it reads –TIP.

3.Pull out the attached rubber plug from the SCP- 100’s DC 3V jack.

8