To remove the clock radio from the bracket, unplug it first. Then slowly slide out the clock radio.
INSTALLING THE
BACKUP BATTERY
To keep the clock running during an AC power failure, install a
If the AC power fails, the clock display disappears, but the clock keeps oper- ating. If the countdown timer is run- ning, a beep sounds to warn you that the countdown time has been inter- rupted, and the APPLIANCE OFF/ON times that control the appliance outlet are saved for at least 8 hours.
Follow these steps to install a backup battery.
Note: Before you install the backup battery, plug in the power cord to pre- vent unnecessary drain on the battery.
1.Slide the battery compartment cover in the direction of the arrow, then lift off the cover to remove it.
Illustration
6
2.Snap the battery into the termi- nals and place it in the compart- ment.
Illustration
Caution: Use only a fresh battery of the required size and type.
3. Replace the cover.
Notes:
•As a safety feature, the appliance outlet is not activated after a power failure. After power is restored, press APPLIANCE ON to use the appliance outlet at any time, or press APPLIANCE AUTO to use the automatic timer with the appliance outlet.
•If the display flashes after an AC power failure, replace the battery and reset the clock.
•Replace the battery when the BATTERY SENTINEL indicator on the right side of the display lights.
Illustration