Product Description, Optional Equipment

Performance		2 Pipe Chilled Water Fan Coil

		Nominal Capacities: 9000, 12000,
		15000, 18000, 24000, 30000 Btuh
		Product Description
	The WCP is a contemporary design, chilled water air handler
	that combines attractive appearance in any decor, with the
	highly efficient conditioning of small to mid size commercial
	or residential spaces. Equipped with unit mounted infrared
andcompatible controls, optional hand held remote also
ns	available.
	Units provide up to a nominal 30,000 Btuh of cooling. Electric

	heat options are available for up to 5KW of supplemental
o	heat. It can be paired with a matching capacity chilled water
	supply. This all American made unit offers ease of installation,

i	operation and service.

at	Air Handler STANDARD FEATURES

c	Factory Installed Controls/Components:
	• Relays and connections for chilled water supply
i
	• Unit mounted digital controls as standard:
f
	– Large ¾” LCD display
	– Anti-short cycle protection
i
	– Fan purge (fan remains on for 60 seconds after
c
	heat/cool call dropped for improved efficiency)
e	• Auto/high/low fan operation
	• Low Volt transformer
p
	NOTE: Auto fan operation automatically selects
S
	fan speed according to heating or cooling demand.

Constant fan operation is manually selected high or low speed.

Enviromaster International LLC

WCP

High Wall Air Handler

P/N# 240003248 Rev. A [06/08]

Materials of Construction:

•Cabinet (available in designer white with grey discharge vanes) fabricated of cold roll steel with structural stiff- eners

•Air inlet panel made from high impact polystyrene with perforated steel grille

•Discharge grille constructed of high temperature Noryl

•Condensate drain pan made from galvanized steel (G90U) with anti-corrosion coating

Optional Equipment

•Hand held infra-red remote controller (a separate hand held remote controller used to command the on-board controls).

NOTE: Unit mounted controls are fully functional without the remote controller.

•Field installed condensate pump

•24V remote thermostat with controls & relays

•Chilled water control valve (N/C 24V ac, 20VA max. or 8 VA max. on units with condensate pumps)

•Electric heat with automatic reset high temperature cutout and redundant high temperature fuse link.

Installer Supplied Items

•Power wiring & low voltage wiring

•Mounting screws and fasteners

•Chilled water & condensate piping

WCP CAPACITIES

Model	Nominal	Total	Sensible	Fluid	Fluid	PD	0
Model	Capacaties	Capacity	Capacity	Temp.	Flow	Ft. H	0
						2
		7,375	6,732	45	1	0.8
	9,000	10,801	8,272	45	2	3.8
09/12		13,270	9,279	45	3	8.0
09/12		8,387	7,189	40	1	0.8
		8,387	7,189	40	1	0.8
	12,000	12,481	8,950	40	2	3.9
		15,643	10,304	40	3	8.1
	15,000	15,624	13,477	45	2	4.4
15 /18	15,000	19,761	15,367	45	3	9.1
		19,761	15,367	45	3	9.1
	18,000	17,724	14,379	40	2	4.5
		17,724	14,379	40	2	4.5
		23,073	16,763	40	3	9.3
		23,073	16,763	40	3	9.3
		20,563	17,564	45	3	2.3
	24,000	29,031	21,178	45	6	8.3
24/30		32,320	22,539	45	9	17.7
24/30		23,600	18,887	40	3	2.4
		23,600	18,887	40	3	2.4
	30,000	34,400	23,423	40	6	8.4
		38,790	25,351	40	9	17.9

Web: http://www.enviromaster.com

WCP specifications

EMI WCP, or Electromagnetic Interference Wireless Communication Protocol, represents a significant advancement in the realm of wireless communication technologies. As a protocol that ensures data integrity and security in the presence of electromagnetic interference, EMI WCP is tailored for environments where electronic devices operate near sources of interference. This article explores its main features, technologies, and characteristics.

One of the principal features of EMI WCP is its ability to maintain robust communication in challenging conditions. By utilizing advanced error-correcting codes, the protocol includes mechanisms that automatically detect and correct errors that may occur during data transmission due to interference. This increases the reliability of communication, especially in industrial settings or urban environments where electronic noise is prevalent.

EMI WCP employs frequency hopping spread spectrum (FHSS) technology as one of its core components. FHSS enables the transmission of data over rapidly changing frequencies, which makes it more difficult for interference to disrupt the communication channel. By continuously switching frequencies, the protocol reduces the chances of prolonged disruption from electromagnetic disturbances.

Another defining technology of EMI WCP is its incorporation of advanced modulation schemes. Techniques such as quadrature amplitude modulation (QAM) are utilized to maximize data throughput while minimizing susceptibility to interference. This allows EMI WCP to operate efficiently even in bandwidth-constrained scenarios, ensuring that users can achieve high-speed data transfer rates.

Security is a paramount consideration for any communication protocol, and EMI WCP is no exception. The protocol includes robust encryption methods that protect against eavesdropping and unauthorized access. This ensures that sensitive information transmitted over the air remains confidential, bolstering user trust and broadening the protocol's applications across various sectors.

Moreover, EMI WCP is designed with scalability in mind. It can support a wide range of devices, from simple sensors to complex mobile platforms, making it suitable for IoT applications. Its adaptability to different data rates and transmission ranges enhances its versatility, allowing it to cater to various industries such as healthcare, automotive, and manufacturing.

In summary, EMI WCP is a forward-looking wireless communication protocol characterized by its resilience against electromagnetic interference, advanced error-correcting capabilities, sophisticated modulation techniques, and robust security features. As technology continues to evolve, EMI WCP stands at the forefront of reliable wireless communication, ensuring data integrity in environments filled with electronic disruptions.

Performance

2 Pipe Chilled Water Fan Coil