MX4302.O/M.QXD 3/4/03 7:47 AM Page 8
OPERATING INSTRUCTIONS (CONTINUED)
DISPLAY BUTTON (REMOTE CONTROL ONLY)
1 |
PRESET EQ
1 |
MUTE |
1 |
Standby (Power Off) Mode
In Standby (Power Off) mode the display shows the correct time. Press the DISPLAY button once to show the TIMER ON time. After five seconds the display returns to the correct time.
Tuner Mode
In Tuner mode the display shows a radio frequency. Press the DISPLAY button once to show the correct time, or twice to show the TIMER ON time. After five seconds the display returns to show the radio frequency.
CD Mode
During CD playback, the display shows the CD track number and elapsed time. Press the DISPLAY button once to see the Remaining Time on the disc, twice to see the correct time, and a third time to see the TIMER ON time. After five seconds the display returns to show the CD track number and elapsed time.
With the power on, press the PRESET EQ button to cycle through the preset EQ settings, or to turn the EQ off. Each press of the PRESET EQ button will cycle as follows: CLASSIC (harp), ROCK (guitar) POP (dancing), Off.
To temporarily mute the sound, press the MUTE button on the remote control; the Mute indicator will appear in the display and the sound will be muted. Press the MUTE button again to restore the sound and the Mute indicator will disappear from the display.
COLOR BUTTONS
When the unit is on, the display will cycle through the colors of the selected Color options - experiment for your favorite color sequence! Change the color selection, or hold a particular color as follows:
1 |
2 |
3 |
When the unit is on, press and release the COLOR MODE button to cycle through the 14 color options. Each option will display a different color sequence in the display.
Press and hold the COLOR MODE button until RHYTHM appears in the display, then release. The display color will then change according to the rhythm of the music. Press and hold the COLOR MODE button again until RHYTHM disappears from the display to cancel Rhythm.
To leave one solid color in the display, press the HOLD SET button; HOLD will appear in the display. Press the HOLD SET button again to continue the color cycling.
8