Panasonic SL-MP30 important safety instructions Sequential Play Basic Play, Stop mode

Sequential Play Basic Play
1 OPEN				5
				V
				O
				L
				U
				M
Label must face upward.				E
Close the lid.				4	/
			HOLD
HOLD
	OPEN			OPEN
2 R			3	Track number in play
		Plug type:		S-XBS
				HOLD
	L	3.5 mm (1/8 in.) stereo
				Elapsed playing time of each track

Follow steps 1–5.

In step 2: Connect the stereo headphones or stereo earphones to the [Ë] jack. (Plug in firmly.)

In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level.

≥Play stops automatically when all the tracks have been played.

For your reference: “)” indication

This indication appears for about 30 seconds if [1/;] is pressed when no disc is loaded in the unit or if the disc is not properly secured.

Operation	Button	Display/reference
	Press during play.	Press again to restart play.
To pause play		S-XBS
	Press during play.	Total number of tracks
To stop play	Resume function	S-XBS
Stop mode
	Play starts from the beginning of
	the current track the next time you	Total playing time
	press [1/;].
To turn off the	Press during stop mode.	No indicator is shown.
unit
Off mode
Skip forward/	Press during play.	≥During program play (page 4), these buttons are
	(Press [:] twice to skip to the
backward
	beginning of the previous track.)	used to skip forward or backward through the
(skip function)	Forward	programmed sequence of tracks.
		≥You cannot skip to tracks that have been played
Rapid forward/	Backward	in random or random repeat play (page 4).
		≥During program play, 1-track repeat play, random
backward		play and random repeat play (page 4), search op-
(search function)		eration is limited to the current track only.

Press and hold during play.

Resume function notes

≥Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re- main active if you replace a disc in the off mode.)

≥Play may resume from the beginning of the next track if you stopped play near the end of a track. ≥The resume function works automatically and cannot be turned off.

“*” indication

This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when the unit is off.)

Removing discs

1Press [∫] to stop play and disc rotation.

2Slide [OPEN 1] to open the lid.

3Press [PUSH] to release the disc.

Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs.

HSUP

PUSH

HOLD

OPEN

Note!

Never insert foreign objects into the unit.

Auto-off function

If you leave the unit in stop mode for about 10 minutes (30 seconds if disc is not loaded), it turns off to save the batteries.

Note on CD-R and CD-RW

This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.

§Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW.

3