Tuner Operation
You can listen to FM and AM stations by tuning in manually, au- tomatically, or using preset memory.
For best reception, extend the headphone cord (FM antenna) for FM and turn the unit for AM.
Manual/Auto tuning
1Select FM or AM.
Presetting stations
You can preset up to 20 FM stations (frequencies) and 10 AM sta- tions (frequencies).
Setting the AM frequency interval (except the U.S.A. and Canada)
When shipped, the AM freguency interval is set to 9 kHz. You can change it to 10 kHz to suit to your country.
When you change it, always remove the AC adaptor and the bat- teries from the unit beforehand.
9K 
10K
9 k : 9 kHz interval
10 k :10 kHz interval
FM/AM
(Repeatedly)
2Select a station.
Manual tuning
Press ¢or 4 repeatedly to select a station you want.
1
2
3
Select the station you want to preset.
Use Manual or Auto tuning mentioned earlier.
Press PROGRAM.
Select the preset number you want.
| FM : 01~20 | | |
AM : 01~10 | | ||
| |||
| |||
PRESET | PRESET | ||
| DOWN | UP | |
Preset number
Auto tuning | 4 Press PROGRAM. |
Hold down ¢ or 4 for a while and then release it. The fre- | |
quency automatically changes up or down to find the next station. |
|
|
|
Preset tuning
Preset the stations beforehand. (See “Presetting stations”.)
1Select FM or AM.
FM/AM
(Repeatedly)
2Select the preset number you want.
PRESET PRESET
DOWN UP
(Repeatedly) |
| Preset station |
| Preset number | |
Changing the FM reception mode
When a broadcast is in stereo, “ST.” lights up and you can hear stereo effects. However, if an FM stereo broadcast is hard to re- ceive or noisy, you can select monaural (MONO) mode. Reception improves, but you lose the stereo effect.
To select the monaural mode
“MONO” appears.
MODE/
FM MODE
To restore the stereo mode
Press MODE/FM MODE once again. “MONO” will go out.
Notes:
The following operation will also restore the stereo mode.
•Pressing FM/AM
•Pressing 4, ¢, PRESET UP, or PRESET DOWN
•Pressing 6
•Turning off the unit
Turning off the unit
7