JVC RD-T50RLB, RD-T70RBU manual Using the Timers, Setting the Clock, Setting the Timer

■Using the Timers

SNOOZE

SNOOZE	/DIMMER	SLEEP	STANDBY/ON
				SLEEP
/DIMMER	1	2	3
	4	5	6
	7	8	9							MULTIJOG
				SLEEP						VOLUME
	10	+10	REPEAT
								CD PORTABLE SYSTEM RD-T70R
	TUNER		CD		STANDBY/ON	CLOCK/			RANDOM/	BASS/
	BAND					DISPLAY	SLEEP	AHB PRO
									REPEAT	TREBLE
				CLOCK/DISPLAY	STANDBY
	FM MODE					TIMER
						FAVORITE
				TIMER 1		TIMER1	TIMER2			MULTI CONTROL
	BASS/TREBLE		AHB PRO	TIMER 2						MANUAL/
										PRESET TUNING
					SNOOZE				CD	TUNER BAND
					DIMMER					AUTO PRESET
	VOLUME
				SNOOZE/DIMMER
	REMOTE CONTROL RM-SRDT7A			[RD-T70RBU]
				SNOOZE	Timer 2 indicator
	[RD-T70RBU Only]			[RD-T50RLB]				SLEEP indicator
					Timer 1 indicator

Jog dial

You can enjoy timer settings with the unique dual timer, consisting of the Timer 1 and Timer 2. These Timers can independently select a playback source from the CD player (Normal Play or Random Play), Tuner, or 8 melodies. For example, you can make up to a mel- ody every morning with the Timer 1, and without changing the Tim- er 1 setting, you can listen to the favorite program by reserving it with the Timer 2. Also, you can use the Sleep Timer to fall asleep to music. Your System automatically turns off after a certain length of time.

CAUTION: If memory backup batteries are ex- hausted or not installed, and the AC power cord is disconnected or there is a power failure, time set- tings will be erased from memory in approx. half a day. Then, the display blinks “0:00”. If this hap- pens, set the current time (clock) and perform the timer setting again.

Setting the Clock

When the Unit is operated on AC power or batteries for the first time, the time indication “0:00” will blink on the display and you need to set the clock.

You can set the clock whether the Unit is turned on or off (Standby) if the AC power is supplied to the Unit.

Notes:

•The clock must be correctly set for the timer to work.

•The clock may gain or lose 1 to 2 minutes per month.

•Perform each setting step within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.

	MULTIJOG		MULTIJOG
CLOCK/	VOLUME	CLOCK/	VOLUME	CLOCK/
DISPLAY		DISPLAY		DISPLAY

(for 3 sec)

(On the Unit)

■1. Press the CLOCK/DISPLAY button for 3 sec- onds or more.

The hour digits blink.

■2. Turn the Jog dial to set the hour.

(Display when using the Timer)

■3. Press the CLOCK/DISPLAY button.

The minute digits blink.

■4. Turn the Jog dial to set the minute. ■5. Press the CLOCK/DISPLAY button.

“CLOCK OK” appears for 2 seconds. The selected time is set and the seconds start counting from 0.

Setting the Timer

The Timer 1 or Timer 2 is turned on at the set time and the System turns on. The selected source is played and the volume fades in. The System will automatically turn off in 1 hour.

The setting procedure for the Timer 1 and Timer 2 is identical.

Notes:

•Perform each setting step within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.

•Tuner timer uses the preset station. So, you need to preset the sta- tions in Preset Tuning mode beforehand. See, “Presetting Sta- tions” on page 6.

(On the Unit: While the Unit is turned on)

■1. Press the TIMER1 or TIMER2 (we write as

TIMER1/2 hereafter) button.

The current hour digits blink. Also, the Timer 1/2 indicator

( TIMER1/2) blinks.

Note:

•If the clock is not set yet, “CLOCK SET” is displayed and the Unit enters the clock setting mode. In this case, set the clock referring to “Setting the Clock” on this page.

■2. Turn the Jog dial to select the hour. ■3. Press the TIMER1/2 button.

The current minute digits blink.

■4. Turn the Jog dial to select the minute. ■5. Press the TIMER1/2 button.

The current source name blinks.

10