Repeat Play

42-5067.fm Page 24 Thursday, August 12, 1999 10:10 AM

Checking, Adding To, Replacing, or Clearing the Programmed Sequence

To check the programmed se- quence, repeatedly press P MODE until the first programmed track num-

ber and flash on the display. Then repeatedly press M-SET/RE- MAIN. Each time you press M-SET/ REMAIN, the display shows the num- ber of the next track in the se- quence.

To add to the end of a programmed sequence, repeatedly press P MODE until the first programmed track num-

ber and flash on the display. Then repeatedly press M-SET/RE- MAIN until 00 flashes on the display.

Press or to display the new track number you want to pro- gram. Then press M-SET/REMAIN.

Note: You cannot program more than 22 tracks.

To replace a programmed track, re- peatedly press P MODE until the first 24

programmed track number and flash on the display. Then repeatedly press M-SET/REMAINto view the track numbers in the programmed sequence. When the track number you want to replace flashes on the

display, press or to se- lect the track you want to program in its place. Then press M-SET/REMAINto program the new track number.

To clear the programmed sequence

from memory, press to stop the CD player, then press OPEN.

Your CD player can repeatedly play a single track, the entire CD, randomly selected tracks, or a programmed se- quence (see “Programmed Play” on Page 22).