Audiovox P-150, AUDIOVOX COMPACT DISC CHANGER SYSTEM Procedure for 45 Angle Installation

PROCEDURE FOR 45° ANGLE INSTALLATION

Note

If the anti-vibration spring position has been changed and verified for 45° angle mounting (as shown on page 3), start with step 2.

1

Set the 4 anti-vibration springs to position "45°".

position "45°"

2Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 8).

NOTE: Use seals (A) to cover unused mounting holes on sides of unit.

Bracket (L)

Bracket (R)

Hexagonal bolt

with washer base (M5 x 8)

3

Determine the mounting location, and drill four mounting holes.

Never mount the unit near the fuel tank.

4

Mount the unit in place, using four self-tapping screws (M5 x 12).

Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.

Self-tapping screw (M5 x 12)

Drill holes 4mm in diameter.

Bracket (L)

Bracket (R)

5