OPERATIONS
PLAYING A CD | PROGRAMMING A CD |
Disc compatibility: CD,
1.Adjust the Source Switch to CD/Aux Mode.
2.Open the CD Door and load a CD into the unit.
3.Press the Play/Pause Button to begin playing the loaded CD.
4.Press the Stop Button to stop the CD during play.
5.Press the Skip/Search Buttons to skip between tracks on the loaded CD.
Press and hold the Skip/Search Buttons to search through individual tracks on a loaded CD.
6.Press the Repeat Button once to repeat the current CD track.
Press the Repeat Button twice to repeat an entire album.
Please note: When an audio source is connected to the Auxiliary Input and a CD is loaded, the Auxiliary Input connection will take priority. To play a CD, disconnect the Auxiliary Input.
Before Programming a CD, read through the “Playing a CD” instructions.
1.After the CD is loaded and ready to play, press the Program Button to begin programming the CD’s tracks.
AM
2.Press the Skip/Search Buttons to select the track to play first.
3.Press the Program Button to program the selected track.
4.Repeat steps
Up to 20 CD tracks can be programmed at one time.
5.Press the Repeat Button once to repeat all of the programmed tracks.
Press the Repeat Button twice to repeat an individual track from the programmed list.
6