4.) The disc will spin for a few seconds as the player reads the disc.
Then the disc will stop and the display will show the total number of tracks on the disc.
5.) Press the PLAY/PAUSE 
button on the top panel to begin playback on track 1.
Track number “01” appears in the display and
the Play 
indicator comes ‘On’.
6.) Adjust the VOLUME and BASS BOOST controls as desired.
7.) Playback will continue until the last track has played then the disc stops and
the Play 
indicator goes ‘Off’, and the display will show the total number of tracks on the disc.
To stop playback before the disc ends press the STOP/BAND 
button on the top panel.
8.) If you are finished listening open the CD door and remove your disc.
9.) To listen to the Radio or Cassette Tape, press the FUNCTION button as desired, or press the POWER button to turn the power ‘Off’.
PAUSE Control
To pause momentarily during CD playback press the PLAY/PAUSE 
button on the top panel again.
The sound stops and the Play 
indicator flashes but the disc continues to spin.
Press the PLAY/PAUSE 
button again to cancel the Pause mode and resume normal playback.
The sound resumes at the same point on the disc and the Play 
indicator stops flashing.
15
PD3812_B032305.p65 | 15 |
23/3/2005, 15:02