__ltw+ffilL
BATTERY INSTALLATION
1.) Open the battery door on the back of the remote control by pressing on the
tab of the battery door in the direction of the arrow and lift it up.
2.) lnsert two 3IAAA" alkaline batteries (not included) into the battery compartment.
Be sure the batteries are inserted according to the polarity markings inside
the battery compartment.
klF
'r/
3.) Replace the battery door.
BATTERY REPLACEMENT
When the batteries become too weak, the operating distance of the remote control is greatly reduced and you will need to replace the batteries.
USING THE REMOTE CONTROL CORRECTLY
.
.
.
.
Point the remote control at the Remote Sensor.
The functions of the buttons on the remote control are the same as the
corresponding controls on the main unit.
When there is a strong ambient light source, the perforrnance of the infrared
Rernote Sensor may be degraded, causing unreliable operation.
The maximum effective distance for remote control operation is about 15 feet.
| 10 |
| |
__ll | 615/2004,10:32 | rt- | |
PD65 59. 60BL_050604. p6 5 | |||
|