Normal CD Playback

•Make sure you have installed the batteries.

•Make sure the HOLD switch is set to the ‘Off’(left) position.

•Press the “VOLUME –” button to a low volume setting before you put on the headphones.

1.) Slide the CD door Open “” switch to the right to unlock and open the CD door.

20 TRACK PROGRAMMABLE CD PLAYER

2.) Place your CD on the center spindle with the printed label side facing up. Press downward on the disc near the center hole until the disc is fully seated on the spindle.

3.) Close the CD door and connect the headphones to the headphone jack

(green color) by pushing the headphone plug the into headphone jack until a ‘click’sound is heard.

4.) Press the PLAY/PAUSE button to begin playback. The “– –” flashes while the player reads the disc.

The total tracks and playing time will appear briefly in the display and then the playback will begin on track “01”.

The display will show the track and elapsed time.

5.) Adjust the VOLUME, and EQ controls as desired.

HD7998_B081105.p65

11/8/2005, 15:05