Pause Control

5.) Press the PLAY/PAUSE button to begin playback. The display will briefly show two flashing dashes “– –” as the player reads the disc.

The total tracks and playing time will appear briefly in the display and then the playback will begin on track “01”.

The display will show the elapsed playing time of the track being played.

6.) Adjust the VOLUME control to your listening preference.

If you prefer more bass, slide the BBS switch to ‘On’position.

7.) Playback will continue until the end of the disc, then the player will stop automatically and the display will again show the total tracks and playing time on the disc.

After approximately 30 seconds the power switches ‘Off’automatically to conserve the batteries and the display goes blank.

To stop playback before the disc ends press the STOP button at any time.

Press the STOP button after the disc has stopped to shut the power ‘Off’ completely.

To pause momentarily during playback press the PLAY/

PAUSE button again. The sound stops but the disc continues to spin. The display flashes.

Press the PLAY/PAUSE button once more to cancel Pause mode and resume normal playback. The display stops flashing.

HD8116_B100305.p65

4/10/2005, 15:28