Programmed Playback

You can program up to 32 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.

Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP button to stop playback before you begin the programming steps below.

1.) Press the FUNCTION button to select CD, insert your disc in the player, close the door, and wait until the total track number appears in the display.

2.) Press the PROG/MEMORY button once. The MEMORY indicator, Program memory “P-01” and Track # “00” appear in the display.

3.) Use the / buttons to select the first track to be programmed. (Example: Track 08).

4.) When track number “08”appears in the display, press the PROG/MEMORY button once again to enter the track “08” in program memory number “01”. The track number returns to “00” and the program memory advances to “P-02” indicating that you may now select a track to be entered in program memory number “02”.

5.) Use the or buttons to select the next track to be programmed. When the desired track number appears in the display press the PROG/MEMORY button again to enter that track in the program memory.

6.) Repeat Step 5 until you have entered up to 32 tracks in the program memory.

PD6850_ib060203.p65

2/6/2003, 14:41