Emerson PD5202 owner manual Program Repeat Playback

Page 14

7.) To begin programmed playback press the PLAY/

PAUSE button. The LCD display will show the first programmed track and playback will begin on that track. The PROGRAM Indicator flashes.

After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the PROGRAM button and then the PLAY/PAUSE button.

To cancel the programmed sequence from memory, press the STOP button at programming mode, open the CD door, or move the FUNCTION selector to the POWER OFF position.

Program Repeat Playback

You can use the Program and Repeat features together

to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 on pages 12-13. When Programmed Playback begins press the REPEAT button twice to

activate the All Tracks Repeat feature. The REPEAT ALL Indicator appears in LCD display and all the tracks in your programmed sequence will be repeated continuously.

To cancel Programmed Repeat Playback press the STOP button until both the PROGRAM and REPEAT Indicators go ‘Off’.

13

PD5202_ib103003.p65

13

30/10/2003, 10:01

Image 14
Contents PD5202 Important Safety Instructions Before WE Begin FCC Information Important NotesClass 1 Laser Product Preparation for USE Unpacking and SET UPPower Sources AC OperationAC Outlet AC Plug Battery Operation Battery Precautions Protect Your FurnitureLocation of Controls and Indicators Front View Back ViewAntenna Information Operating InstructionsListening to the Radio Playing Compact Discs Normal PlaybackOne Track Repeat To Start Playback from a Specific TrackRepeat Playback ALL Tracks RepeatProgrammed Playback Program Repeat Playback Stereo Headphone Jack Care of the Cabinet Care and MaintenanceCompact Disc Care Troubleshooting Guide Symptom Possible Cause Solution RadioLimited Warranty Emerson