PROGRAMMED PLAYBACK
Programmed playback enables tracks on a disc to be played in any desired order. Up to 20 tracks can be programmed.
NOTE : Programming can only be done when the player is in Stop mode.
1.) Press the PROGRAM button. “PROGRAM” indicator flashes in the display.
P R O G R A M
PROGRAM
2.) Press the 
FWD or 
REV button to select the desired track number. Example: Track 7.
P R O G R A M
REV. SKIP FWD.
SEARCH
3.) Press PROGRAM button again to memorize the track.
4.) Repeat steps 2 and 3 until all desired tracks are programmed.
5.) Press the PLAY/PAUSE 
button to start playback. “PROGRAM " indicator is flashing in the CD display.
PLAY 
P R O G R A M 
6.) Press STOP 
button to stop programmed playback. The CD playback stops but the program remains in the memory.
7.) Press PROGRAM and PLAY/PAUSE 
buttons to resume programmed playback.
8.) To clear the program memory, open the CD door, change to Radio function or switch the power ‘OFF’.
12
PD5198_032105.p65 | 12 |
21/3/2005, 16:00