Programmed Playback

This feature allows you to program up to 20 tracks on a disc for playback in any desired order.

Note: You cannot program tracks while a disc is playing. If the disc is playing press the STOP button first before beginning the programming steps below:

PRG.

1.) Press the PRG. button to enter the Program Mode. The Program indicator and Program number ‘01’flash.

PRG.

2.) Press the F. SKIP or B. SKIP buttons to select the first track number you wish to enter in the program memory. Example: Track Number 8.

PRG.

3.) When the desired track number appears on the display, press the PRG. button again to enter that track in memory. The program number display advances to “02”.

4.) Repeat Steps 2-3, selecting a different track number each time until you have entered up to 20 tracks in the program memory.

Note: You may program the same track number to play multiple times in the program sequence if desired.

5.) Press the PLAY/PAUSE

button to begin

PRG.

Programmed Playback. The Program indicator stops flashing and remains ‘on’. Playback will begin with the first track you programmed and will continue until the last programmed track has played.

NR53_010704.p65

7/1/2004, 17:24