APPENDIX
TROUBLESHOOTING
The operation does not work normally.
The remote control
doesn’t work
Power is suddenly
turned off
ACheck to see if there is any object between the product and the remote control caus- ing obstruction. Ensure you are pointing the remote control directly at the set.
AEnsure that the batteries are installed with correct polarity (+ to +, - to
AEnsure that the correct remote operating mode is set: TV, VCR, etc.
AInstall new batteries.
AIs the sleep timer set?
ACheck the power control settings. Power interrupted.
ANo broadcast on station tuned with Auto sleep activated.
The video function does not work.
No picture &No sound
Picture appears slowly
after switching on
No color, poor colour,
or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
ACheck whether the product is turned on.
ATry another channel. The problem may be with the broadcast.
AIs the power cord inserted into wall power outlet?
ACheck your antenna direction and/or location.
ATest the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.
AThis is normal, the image is muted during the product startup process. Please contact your service centre, if the picture has not appeared after five minutes.
AAdjust Colour in menu option.
AKeep a sufficient distance between the product and the VCR.
ATry another channel. The problem may be with the broadcast.
AAre the video cables installed properly?
AActivate any function to restore the brightness of the picture.
ACheck for local interference such as an electrical appliance or power tool.
AStation or cable product experiencing problems, tune to another station.
AStation signal is weak, reorient antenna to receive weaker station.
ACheck for sources of possible interference.
ACheck antenna (Change the direction of the antenna).
81