Setting up the Player (Continued)
Audio Connection to Optional Equipment
Connect the unit to your optional equipment for audio output.
You must set the Mode selection menu to “USB” or “ DISC” mode.
Amplifier(Receiver)
COAXIAL | R | L |
DIGITAL INPUT | AUDIO INPUT |
Amplifier equipped with |
| |
Connections | ||
Logic ll / Pro Logic: Connect the AV IN/OUT jacks on the unit to | ||
the audio left and right IN jacks on your amplifier, receiver, or | ||
stereo system, using the audio cables. | ||
Amplifier equipped with | ||
audio / video receiver equipped with a | ||
(Dolby Digital™, MPEG 2, or DTS): Connect one of the unit | ||
| ||
Coaxial jack to the corresponding in jack on youramplifier. Use an |
| |
optional digital audio cable. |
| |
Digital |
| |
A digital |
|
and/or
Coaxial cable (Not supplied)
Audio/ Video cable (Supplied)
For this you need a |
ports one or more of the audio formats supported by your unit |
such as MPEG 2, Dolby Digital and DTS. Check the receiver man- |
ual and the logos on the front of the receiver. |
NOTES
•If the audio format of the digital output does not match the capabil- ities of your receiver, the receiver produces a strong, distorted sound or no sound at all.
•Six Channel Digital Surround Sound via a digital connection can only be obtained if your receiver is equipped with a Digital Multi- channel decoder.
•To see the audio format of the current DVD in the
Right side of unit
37