Shared File Playback (Stream)
10.Set the network configurations of the Freecom MediaPlayer.
You have to connect the Freecom MediaPlayer to a TV set for this setup. See "6.1 Connect Video Cable".
Press "SETUP" on remote control for moving to setup screen. Go to "Network". On that screen, select 'DHCP Support Off' and write IP address & Subnet mask.
For example: |
|
IP address: | 192.168.1.2 |
Subnet mask: | 255.255.255.0 |
After writing, press "SETUP" again for saving configurations.
If you have already been provided dynamic IP address from DHCP Server or IP Router on your local area network, you don't need to write static IP address absolutely. Use 'DHCP on' or write IP address & Subnet mask that DHCP Server or IP Router provide.
Check 'IP address obtained automatically'.
Whenyouuse'DHCPOn',youcanseetheIPaddressoninformationscreen with pressing "INFO" button.
EN
3
33