Chapter 3: Basic Setup
4) Enter NDAS ID and Write key, and click [Next].
7) After the installation, So Smart’s HDD is recognized.
>>Caution <<
Backup NDAS ID and Write key. It will not be issued again.
5)If ID and key are correct, you will be asked the following after searching for the NDAS device. Click first option and [Next].
3.44.Mount / Dismount
A. Mount
1)By clicking the NDAS icon in the bottom right icon tray, you can confirm the registered NDAS device. You can select “wire” or “wireless” to get it online. (e.g. wire is online (white) and wireless is offline (black) in the figure below)
6) Finish the installation of NDAS Controller by following the wizard.
Then, select Mount (Read/Write).
2)When it is connected to NDAS device, the selected item is indicated as “blue color” and “Mounted (RW)”.
Shortly after, the NDAS device will be accessed.
It may take a while to recognize So Smart as a hard disk depending on your network system.
25