Compact Disc Operation, Inserting a CD

Compact Disc Operation

Inserting a CD

•Set the Function switch to CD.

•To open the CD compartment, lift the CD door on the edge marked OPEN/CLOSE.

•Insert the AUDIO CD, printed side facing up.

•Close the cover.

•The CD-player scans the contents list of the CD, then the total number of tracks appears on the display.

Playing a CD

•Press PLAY/PAUSE to start playback.

•The display shows the track number.

•Adjust the sound using the VOLUME and DBBS controls.

•For brief interruptions, press PLAY/PAUSE – the“ ll“ appears on the display.

•To resume playback, press PLAY/PAUSE again.

•To stop playback, press STOP.

– The total number of tracks will then appear on the display.

The CD player also goes to STOP position when:

•If the CD door is opened

•When the end of the CD is reached

•If the Function selector is changed

•If the batteries run down or if the power supply is interrupted.

•To take out the CD, open the CD door by lifting the edge marked OPEN/CLOSE.

•Open the CD door only if the CD-player is in position STOP.

Selecting another track during play

•Press PREVIOUS or NEXT until the desired track number appears in the display.

•The selected track begins to play after PLAY/PAUSE is pressed.

Starting with a particular track

•Press PREVIOUS or NEXT until the required track number appears in the display.

•Press PLAY/PAUSE.

•Play starts from the selected track.

Searching for a passage during a play

•Hold PREVIOUS down to search backwards to the beginning.

•Hold NEXT down to search forwards to the end.

Note:

This function can be described as“audibly”searching for a title. During the search, volume is reduced and returns to its adjusted level as soon as the button is released.