DCR5000.O/M.QXD 1/28/03 7:21 AM Page 10
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
1
With the unit off, press the Clock Set/Alarm Set button twice to set the alarm time; the Alarm On indicator and the display will blink.
2
3 | 2 |
Press the Tuning Down/Hour button
❶to set the alarm hour and the Tuning Up/Minute button ❷ to set the alarm minute. Make sure the appropriate AM/PM indicator is lit if using the 12 hour mode. Wait 10 seconds, or press the Clock Set/Alarm Set button ❸ again and the time will be set.
TO SET THE ALARM TO WAKE TO RADIO
1 | 2 |
|
|
|
|
Set the alarm time as previously |
|
| Press the Alarm On/Off button and |
instructed. Select a radio station as |
|
| the Alarm On and Radio (Alarm) |
described on page 8 and make sure |
|
| indicators will light. When the actual |
the Volume control is set as desired. |
|
| time matches the selected preset |
NOTE: To avoid having the volume |
|
| alarm time, the radio will |
set too low that it cannot be heard |
|
| automatically turn on. |
when the alarm sounds, this unit will |
|
| To shut off the alarm, see TO SHUT |
automatically set the volume to a |
|
| THE ALARM OFF section on the |
preset level as needed. |
|
| next page. |
|
|
|
|
| 10 | ||