Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired.
NOTE: Programming can only be done while the player is in the Stop mode. If a disc is playing press the 
STOP button to stop playback before performing the programming steps below.
1.) Turn the unit ‘On’, press the 
CD PLAY/PAUSE button to select CD function and load the desired disc in the player.
Wait until the player reads the disc and the display shows the total track number.
2.) Press the CLK.ADJ/PROG. button.
The AM/PROG. indicator and the Program Number “0 1” flash in the display, indicating that you can select the first track to be programmed.
3.) Press the 
or 
buttons to select the first track. The desired track number appears on the display.
Example: Track “7”.
4.) Press the CLK.ADJ/PROG. button again.
The selected track is entered in Program memory number 01 and the display advances to “0 2”indicating that you can select the next track to be programmed.
5.) Repeat Steps 3 and 4 to program up to 20 tracks in the memory.
15
CKD1100_052107.p65 | 15 |
21/5/2007, 10:44