Philips AJ3231/37 user manual Troubleshooting, Problem, No sound/power, Alarm does not function

Page 11

TROUBLESHOOTING

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service center.

WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. Do not open the set as there is a risk of electric shock.

Problem

Possible Cause

• Remedy

No sound/power

Volume not adjusted

• Adjust the volume

Occasional crackling sound during FM broadcast

Weak signal

• Adjust the position of the Pigtail

Continuous crackling/hiss disturbance during AM (MW) broadcast

Electrical interference from TV, computer, fluorescent lamp, etc.

• Move set away from other electrical equipment

The alarm does not function

Alarm time not set and or alarm mode not selected

• Set the alarm time and / select alarm mode

Volume too low for RADIO

• Adjust the volume

Radio alarm not adjusted to radio station

• Tune to a radio station

Image 11
Contents Register your product and get support at Clock RadioPage Proof of Purchase Product Safety Additional Benefits Important Safety Instructions Philips Limited Warranty ONE 1 Year Clock control Controls Alarm 1, AlarmCongratulations on your purchase and welcome to Philips Repeat Alarm Sleep OFF Radio Setting the Clock and Alarm TimeTime is displayed using the 12-hour clock Selecting the Alarm Mode GeneralRepeat Alarm Switching OFF the AlarmHour Alarm Reset Canceling the Alarm CompletelyApparatus shall not be exposed to dripping or splashing Safety InformationAlarm does not function TroubleshootingProblem No sound/powerIllumination Brightness Installation Power SupplyClock Memory Backup 53 kg / 1.17 pounds Connecting AN External DeviceDimensions w x d x h 140 x 61 x 140 mm X 2.4 x 5.5 inch Disposal of your old product Environmental InformationAJ3231