Philips AJ3231/79 user manual Connecting AN External Device, Environmental Information

Page 7

IMPORTANT!

1During SLEEP activation, if you attempt to cancel SLEEP by pressing RADIO

ON/OFF, the radio cannot be switched off.

2To switch off, press RADIO ON/OFF and REPEAT ALARM (SLEEP OFF) alternate- ly and repeatedly.

CONNECTING AN EXTERNAL DEVICE

You can listen to the sound of the connected external device through your AJ3231’s speakers.

1Adjust the BAND (MW/FM/AUX) control to select AUX.

2Connect the AUX-IN cable of the set to an AUDIO OUT or headphone jack on an external device (such as CD player, or VCR).

ENVIRONMENTAL INFORMATION

We have reduced packaging to the minimum for easy separation into two materials: paper and cardboard.

Your set consists of materials which can be recycled if disassembled by a special- ized company. Please observe local regulations on the disposal of packing materi- als and old equipment.

Specifications

AC Power

230 – 240 V / 50

Hz

Power Consumption

 

 

Active

5.0

W

Standby

2.5 W

Dimensions (w x d x h)

140 x 61 x 140 (mm)

Weight

0.53 kg

Image 7
Contents Register your product and get support at Page Clock control Controls Alarm 1, AlarmRepeat Alarm Sleep OFF Congratulations on your purchase and welcome to PhilipsIllumination Brightness Installation Power SupplyClock Memory Backup Backup Replace the battery doorTo improve reception Setting the Clock and Alarm TimeSelecting the Alarm Mode General RadioRepeat Alarm Switching OFF the AlarmHour Alarm Reset Canceling the Alarm CompletelyDimensions w x d x h 140 x 61 x 140 mm Connecting AN External DeviceEnvironmental Information Apparatus shall not be exposed to dripping or splashing Safety InformationTroubleshooting Philips Consumer Electronics Warranty Policy for Australia Page Meet Philips at the Internet