Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock.

Problem

–Possible Cause

• Remedy

No sound/power

–Volume not adjusted

• Adjust the volume

Occasional crackling sound during FM broadcast

–Weak signal

• Extend and position the pigtail

Continuous crackling/hiss disturbance during AM broadcast

–Electrical interference from TV, computer, fluorescent lamp, etc.

• Move set away from other electrical equipment

The alarm does not function

–Alarm time not set and or alarm mode not selected

• Set the alarm time and / select alarm mode

–Volume too low for RADIO

• Adjust the volume

–Radio alarm not adjusted to radio station

• Tune to a radio station