Philips AJ6200DB user manual Set time, Turn on, Switch to standby mode

Page 6

Note

•• Batteries are not supplied with the accessories.

•• bAt shows on the display when the battery level is low.

1 Open the battery compartment.

2 Insert 2 batteries (type: 1.5V LR6/AA) with correct polarity (+/-) as indicated.

3 Close the battery compartment.

Set time

1 Rotate the Third Knob to "SET TIME" to activate clock setting mode.

»»Hour and minute digits blinks.

2 Rotate the First Knob to adjust the hour.

3 Rotate the Second Knob to adjust the minute.

4 Press OK on the First Knob to confirm.

»»The setting time is displayed.

5 Rotate the Third Knob to CLOCK after setting.

»»The hour and minute digits stops blinking.

Note

•• When an iPod/iPhone is connected, the clock radio synchronizes time from the iPod/iPhone automatically.

Turn on

The clock radio turns on automatically once your plugged in.

Switch to standby mode

Press SOURCE for 3 seconds to switch to standby mode.

»»The source indicator on the display panel turns off.

EN 6

Image 6
Contents Always there to help you Register your product and get support atContents Your clock radio Whats in the boxOverview of the main unit Get started Connect powerAC power BUZZ/FM/DOCKTurn on Switch to standby modeSet time Clock radio turns on automatically once your pluggedCompatible iPod/iPhone Adjust volumePlay from iPod/ iPhone Listen to audio from iPod/ iPhoneStore FM radio stations automatically Listen to FM radioTune to FM radio stations Store FM radio stations manuallySet alarm timer Other featuresSelect a preset radio station Select alarm sourceSnooze the alarm Set sleep timerActivate/deactivate alarm timer Play audio from an external deviceAdjust display brightness SpecificationsProduct information Troubleshooting Environmental information13 EN AJ6200DAJ6200DB98UMV3.0