•Remove the coiled AC cord from the storage compartment and extend it to its full length.
•Position the cover over the battery compartment and place the cord into the notch on the battery compartment cover as shown.
O P E N | O P E N |
•Slide the battery cover upward until it snaps back into place. Connect the AC cord to your 120V 60Hz outlet.
Note: When the AC power cord is connected to the outlet the power source automatically switches to AC. You may leave batteries inside the unit if desired. There is no battery consumption when the power cord is connected to an AC outlet.
CAUTION
This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty.
This radio uses a polarized AC plug which has one blade wider than the other. This plug will only fit into a polarized AC outlet. This is a safety feature. If the plug will not fit, you may have an older
AC Outlet AC Plug
5
5 |
27/6/2005, 11:56