4.) Repeat step 3, selecting a different track number each time until you have entered up to 20 tracks in the program memory.
5.) When you have completed programming the desired
tracks press the PLAY/PAUSE button to begin programmed playback. The PROG indicator stops flashing and remains ‘On’. Playback will begin on the first track you programmed and will continue until the last programmed track has played.
6.) When the program is completed the player stops and the display again shows the correct time. However the PROG indicator remains ‘On’and the player remains in the Programmed Playback mode. If you press the PLAY/PAUSE button the programmed sequence will play again.
To cancel the Programmed Playback mode press the STOP button while in programming mode. The PROG indicator goes ‘Off’.
Programmed Playback may also be canceled by opening the CD door.
Programmed Repeat Playback
You may use the Programmed Playback and Repeat features together to continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 4 above.
When Programmed Playback begins press the REPEAT button twice to select the Repeat All Tracks mode. The REP indicator and the PROG indicator remains ‘On’. The programmed sequence will be repeated continuously.
16
RET66_080504.p65 | 16 |
5/8/2004, 16:05