Emerson CKT9087 owner manual Resetting the Clock After a Total Memory Loss

Page 36

RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS

If you do not change the built in lithium battery within a reasonable period of time after you see the ‘flashing’BATTERY LOW warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the SmartSet® internal computer. If the unit is disconnected from the AC outlet after the battery is exhausted, or if a power interruption occurs, the SmartSet® memory will be lost and the clock will need to be reset when the power is restored. Be sure to install a fresh lithium battery before you reset the clock, otherwise the clock will need to be reset each time the power is interrupted.

If the lithium battery is exhausted and you experience an interruption in the AC power supply, the clock will reset itself to its initial default setting when the power is restored.

The initial default setting is “12:00 AM, Saturday, January 1st (1 1), 2005”.

If you notice that the time on your SmartSet® clock radio is completely incorrect, and the day indicator is also wrong, press the MONTH/DATE button to see the date. If the date display is showing “1 1” (January 1st), you probably experienced a total memory loss.

To reset the clock after a total memory loss, proceed as follows:

1.) Follow the instructions on page 34 and install a new CR2430 lithium battery in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Depress the MONTH/DATE and TIME buttons together. The display will change from ‘time’to ‘year’.

While holding the MONTH/DATE and TIME buttons, press the SET + button to set the display to the correct year, then release the buttons.

4.) Depress the MONTH/DATE button. The display will change from ‘time’to ‘month/date’(mm/dd).

While holding the MONTH/DATE button, press the SET + button to set the display to the correct month and date. The Day indicator will change automatically as you adjust the month/date settings. When the correct month and date appear on the display, release the buttons.

35

CKT9087_090606.p65

35

6/9/2006, 10:56

Page 35 Page 37
Image 36
Page 35 Page 37
Contents CKT9087 Important Safety Instructions CKT9087090606.p65 2006 CKT9087090606.p65 2006 IM Portant Notes FCC InformationFCC wants you to know Ringer Equivalence Number RENPreparation for USE Unpacking and SET-UPInstalling The Telephone Memory Back-up Battery Install the telephone memory back-up battery as followsLow Battery Indication Connecting The Telephone CordsLine Cord Disconnecting The Telephone Cords Coiled Handset CordPower Source Protect Your FurnitureLocatio N of Contro LS and I Ndicators TOP Panel Telephone Handset Telephone LCD Display Call Waiting and Caller ID Service Information Telephone Operating InstructionsCaller ID Display Set-up and Adjustments CKT9087090606.p65 2006 Other Adjustments Handset Volume LevelTelephone Ringer Level TONE/PULSE Dialing SelectorCaller ID Display Viewing Angle Storing Numbers In The Handset Memory To store numbersReceiving Calls Call WaitingMaking Calls Last Number Redial MemoryCaller ID Operation CKT9087090606.p65 2006 To Dial a Number Stored In Caller ID Memory To Delete a Number from The Caller ID MemoryTo Delete All Numbers From The Caller ID Memory Setting the TIME, the First Time Clock Radio Operati NG I Nstructi ONSDaylight Saving and Leap Year Adjustments Date DisplayYear Display Manual Time Adjustments Adjusting the Wake UP TimesSelecting the Alarm Mode Checking the Wake UP Times and Alarm ModeListening to the Radio Antenna InformationWake to Radio Snooze Alarm Wake to BuzzerRadio and Buzzer Operation Sleep to Music Timer Dimmer ControlChanging the Lithium Battery Be Careful not to Lose this Small ScrewBattery holder slot Turn the holder up side down Resetting the Clock After a Total Memory Loss Important Note Care and M Aintenance Limited Warranty Emerson
Top Page Image Contents