Emerson CKS3048, CKS3038S owner manual Wake to Radio

Page 14

WAKE TO RADIO

1.) Turn the radio ‘On’and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘Off’again.

2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.

3.) Set the ALM (Alarm) selector switch for one or both alarms to the ‘RADIO’ position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set.

4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and then shut off automatically.

5.) To stop the radio sooner, press either the appropriate ALM 1 or ALM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting).

6.) If you do not want the alarm to turn the radio on the following day, set the appropriate ALM selector to the “OFF” position.

13

CKS3038S-48_080106.p6513

1/8/2006, 10:48

Image 14
Contents With SmartSet Important Safety Instructions Congratulations IM Portant Notes FCC InformationProtect Your Furniture Unpacking and SET UPPreparation for USE Power Source Sure Alarm Battery BACK-UP SystemLocatio N of Contro LS and I Ndicators Right Side Panel Setting the TIME, the First Time Operating InstructionsYear Display Daylight Saving and Leap Year AdjustmentsDate Display Manual Time Adjustments Adjusting the Wake UP TimesSelecting the Alarm Mode Checking the Wake UP Times and Alarm ModeListening to the Radio Antenna InformationWake to Radio Snooze Alarm Radio and Buzzer OperationSleep to Music Timer Dimmer ControlChanging the Lithium Battery Be Careful not to Lose These Small ScrewsResetting the Clock After a Total Memory Loss Important Note Lithium Battery Precautions Care and M AintenanceLimited Warranty Emerson