Emerson CKW2000 owner manual IM Portant Notes

Page 4

IM PORTANT NOTES

•Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.

FCC Information

•Operate controls and switches as described in the manual.

•Before turning on the power, make certain that the AC power cord is properly installed.

•When moving the set, be sure to first disconnect the AC power cord.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3

CKW2000_041207.p65

3

12/4/2007, 11:56

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CKW2000 Important Safety Instructions CKW2000041207.p65 12/4/2007 IM Portant Notes Unpacking and Set Up Protect Your FurnitureInstalling The Back-Up Batteries Important Battery Precautions Replacing The Back-Up BatteriesInstalling The AC Adapter Important Locatio N of Contro LS and I Ndicators Front Panel Top PanelWEATHER/HAZARD Button Operating Instructions Menu Button Select ButtonLCD Panel Viewing Angle Important LCD Panel Backlighting Normal Mode / Continuous ModeLCD Panel Brightness Control SNOOZE/DIMMER Button Setting The Time SUNDAY, 01 JAN 2006Setting The Date Setting The Alarm Times Setting The Alarm 1 Wake Up TimeSetting The Alarm 2 Wake Up Time Selecting The Alarm Mode Radio, Buzzer, or Off Snooze Operation Manual Tuning Automatic TuningListening To The Radio Antenna Information Presetting Stations In the Tuner Memory Example FM 88.3 MHZRecalling Preset Memory Stations Changing Preset Station MemoriesSleep To Music Timer Instant Weather Band Reception Channel # FrequencyTo set up the radio to receive your local weather station CKW2000041207.p65 12/4/2007 NWR All Hazards Emergency Messages Specific Area Message Encoding S.A.M.EProgramming Your County Code In the CKW2000 By telephone at 1-888-NWR-SAMECounty Code Multiple Other Settings and Adjustments Select Alert Mode Siren or Siren/Voice Defeat Siren Mode CKW2000041207.p65 12/4/2007 Select Siren Volume Backlight Operation Normal / Continuous Add New Alert Siren TestReceiving Noaa Hazard Alert Messages Receiving/Storing Overlapping AlertsTest Alert Signals Additional InformationCare and Maintenance Care Of CabinetAU898M CKW2000-041207-02

CKW2000 specifications

The Emerson CKW2000 is an advanced data logger and controller designed for a variety of industrial applications. Known for its robustness and reliability, the CKW2000 is engineered to monitor and control environmental conditions in real-time, ensuring optimal performance and compliance in critical settings such as pharmaceuticals, food and beverage, and HVAC systems.

One of the key features of the Emerson CKW2000 is its multifunctionality. It integrates data logging, monitoring, and control capabilities into a single device, simplifying the infrastructure of data management while improving operational efficiency. The device supports various input types, including temperature, humidity, and pressure, allowing it to adapt to diverse monitoring needs.

The CKW2000 boasts advanced connectivity options. It supports both wired and wireless communication protocols, enabling seamless integration with existing systems, and facilitating real-time data access from anywhere. Its compatibility with popular industrial communication standards, such as Modbus and Ethernet/IP, allows for easy interfacing with other equipment and software, making it a versatile choice for organizations looking to enhance their data acquisition systems.

Another remarkable characteristic of the CKW2000 is its user-friendly interface. The device features a large graphical display that provides clear visibility of all vital data at a glance. The navigational layout is designed to simplify operation, allowing users to effortlessly access various settings and alerts. Additionally, it comes equipped with customizable alarm thresholds, ensuring that users are promptly notified of any deviations from predefined conditions, thereby protecting sensitive products and processes.

The Emerson CKW2000 also prioritizes data security. It includes built-in features that safeguard against unauthorized access, ensuring that sensitive information remains protected. Furthermore, the device has data integrity measures in place, preserving the accuracy and reliability of the collected data over time.

In conclusion, the Emerson CKW2000 is a powerful data logger and controller designed to meet the demands of modern industrial applications. With its multifunctionality, advanced connectivity options, user-friendly interface, and robust security measures, the CKW2000 enables organizations to monitor and control critical environmental factors with precision and confidence. Its adaptability and reliability make it an essential tool for industries that require stringent compliance and operational efficiency.
Top Page Image Contents