TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom | Possible Cause |
Radio |
|
Noise or sound | Station not tuned properly for |
distorted on AM or FM | AM or FM. |
broadcasts. | FM: AC cord is not extended. |
| AM: The bar antenna is not |
| positioned correctly. |
AM or FM, no sound. | Handset is not placed correctly |
| on the base |
| Volume at minimum. |
TELEPHONE |
|
Phone does not ring. | RINGER switch is set to OFF |
| position. |
Telephone does not | Handset is placed incorrectly. |
work. | Line cord or plug loose. |
Phone number can’t be | TONE/PULSE switch is set |
dialed. | incorrectly. |
CLOCK |
|
Display flashes. | Back up battery weak or loose. |
Alarm does not sound. | ALARM switch is set to OFF |
| position. |
| Times are not set correctly. |
No clock display. | No AC power. |
Solution
Retune the AM or FM broadcast station.
Extend the AC cord for best reception.
Reposition the unit until best reception is obtained. Place the handset correctly.
Increase Volume.
Set RINGER switch to LO or HI position.
Place the handset correctly. Check and secure all connections.
Set the TONE/PULSE switch to correct position.
Secure or change new battery. Reset the clock. Set ALARM switch to RADIO or BUZZER position Set correct times and make AM/PM setting.
Check AC cord and AC outlet.
1 6
GP816_ib072502.p65 | 16 |
25/7/2002, 11:38