Emerson CKS1851, CKS1850 owner manual Sleep to Music Timer, Dimmer Control

Page 16

SLEEP TO MUSIC TIMER

You can program the sleep timer to play the radio for up to 90 minutes and then shut off automatically.

1.) Press the SLEEP button.

The display will briefly show “10”and the radio will begin to play.

After 10 minutes the radio will shut off automatically. Each time you press the SLEEP button the sleep timer will start at 10 minutes. This is the sleep timer default setting.

2.) To increase or decrease the amount of time that the radio will play before shutting off, hold the SLEEP button and press either the UP or DOWN button to change the display to the desired sleep time, up to a maximum of 90 minutes or a minimum of 2 minutes.

Note: When you change the sleep timer from the 10 minute default setting to a different setting, the new setting becomes the default setting. Whenever you activate the sleep timer it will begin with your new default setting and count down to zero from that point.

3.) To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’ immediately, press the SNOOZE Bar.

IMPORTANT: Remember that the station and volume settings you choose for the Sleep To Music operation are the same settings you will hear if you set the alarm for wake to radio the following morning.

DIMMER CONTROL

The DIMMER control was set to the HIGH position at our factory. If you find the clock display is too bright in a darkened room, set the DIMMER control to the LOW position.

15

CKS1850-1851_072706.p6515

27/7/2006, 16:13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents With SmartSet Important Safety Instructions Congratulations IM Portant Notes FCC InformationPreparation for USE Unpacking and SET UPProtect Your Furniture Power Source Sure Alarm Battery BACK-UP SystemLocatio N of Contro LS and I Ndicators Radio ON/OFF Button Setting the TIME, the First Time Operating InstructionsDate Display Daylight Saving and Leap Year AdjustmentsYear Display Manual Time Adjustments Adjusting the Wake UP TimesSelecting the Alarm Mode Checking the Wake UP Times and Alarm ModeListening to the Radio Antenna InformationWake to Radio Snooze Alarm Radio and Buzzer OperationSleep to Music Timer Dimmer ControlChanging the Lithium Battery Be Careful not to Lose this Small ScrewResetting the Clock After a Total Memory Loss Important Note Lithium Battery Precautions Care and M AintenanceLimited Warranty Emerson

CKS1851, CKS1850 specifications

The Emerson CKS1850 and CKS1851 are highly regarded analyzers designed to offer exceptional performance and precision in various industrial applications. These sophisticated devices are primarily known for their robust construction, advanced features, and user-friendly interface, making them ideal for demanding operational environments.

One of the standout features of the Emerson CKS1850 and CKS1851 is their capability to perform real-time gas analysis. Equipped with advanced infrared spectroscopy technology, these analyzers can measure a wide range of gases, including carbon dioxide, methane, and oxygen. This provides users with crucial insights into combustion efficiency and emissions control, supporting compliance with environmental regulations.

The Emerson CKS1850 and CKS1851 also boast dual-channel analysis, enabling simultaneous measurement of two different gases. This is particularly beneficial in applications requiring precise monitoring across multiple parameters, enhancing workflow efficiency and reducing the need for multiple devices. The analyzers can easily switch between gas types and measurement modes, offering versatility in various operational contexts.

Connectivity options are another highlight of the Emerson CKS1850 and CKS1851. Both models come equipped with multiple communication protocols, including Modbus and Ethernet, allowing seamless integration into existing control systems. This connectivity facilitates remote monitoring and control, ensuring that operators have up-to-date information at their fingertips.

The user interface of the CKS1850 and CKS1851 is designed for simplicity and ease of use. A high-resolution touchscreen display provides clear readings and data visualization, making it straightforward for operators to navigate through different settings and parameters. Furthermore, the intuitive menu design enhances user experience by reducing training time for new personnel.

Both models are built with durability in mind. The robust housing provides protection against harsh industrial environments, ensuring that the analyzers maintain their performance over time. Additionally, the low-maintenance design minimizes downtime, making them a cost-effective solution for continuous operation.

In summary, the Emerson CKS1850 and CKS1851 analyzers combine advanced gas analysis technologies with user-friendly features and exceptional durability. Their real-time measurement capabilities, dual-channel analysis, extensive connectivity options, and intuitive user interfaces make them indispensable tools in various industries, including petrochemical, energy, and environmental monitoring.
Top Page Image Contents