Date Display
To see the correct date at any time, depress the MONTH/DATE button. The display changes from time to month and date (MM/DD).
For example, May 21st will appear as “5 21”.
When you release the MONTH/DATE button the display returns to the correct time.
Year Display
To see the correct year, depress the MONTH/DATE and TIME buttons together, the display changes from time to year.
When you release the MONTH/DATE and TIME buttons the display returns to the correct time.
Daylight Saving and Leap Year Adjustments
All Daylight Saving and Leap Year adjustments are made automatically by the SmartSet® internal computer as follows:
•Start of Daylight Saving Time:
At “2:00 AM” on the first Sunday in April, the clock will automatically advance to “3:00 AM”.
•End of Daylight Saving Time:
At “3:00 AM” on the last Sunday in October, the clock will automatically reset to “2:00 AM”.
•Leap Year:
At “12:00 Midnight” on February 28th, the calendar display will change to “2 29”.
Important Daylight Saving Time Information
As a result of the new Energy Bill that was passed by Congress in August of 2005, Daylight Saving Time is scheduled to be extended starting in 2007. This SmartSet® Clock Radio has been programmed to adjust itself automatically for Daylight Saving Time through 2006. We have also provided instructions to allow you to change the Daylight Saving starting and ending dates for 2007 and beyond. You only need to make this adjustment once and then this clock radio will automatically adjust itself for the new Daylight Saving Time through the year 2099.
The instructions for adjusting the Daylight Saving starting and ending dates will be found on a separate addendum sheet included with this Instruction Manual.
1 3
CKD5808_031406.p65 | 13 |
14/3/2006, 11:32