OPERATING INSTRUCTIONS
•Make sure you have installed the
•Make sure you have extended the FM Lead Wire Antenna to its full length.
•Connect the AC power cord plug to a 120V 60Hz AC outlet.
SETTING THE CLOCK
When the radio is connected to the AC outlet for the first time the display will show flashing “12:00”.
1.) First depress and hold the TIME/DISPLAY button and then press the SKIP FWD. button or the SKIP REV. button to adjust the display forward or back to the correct time. The display will move slowly at first, and then begin to move rapidly.
2.) Be sure to set correctly for AM or PM. If the AM indicator is ‘On’, the time displayed is AM. When the display shows the correct time, release all the buttons.
9
CKD3630_060404.p65 | 9 |
4/6/2004, 15:19