Emerson CKD5809C owner manual Manual Time Adjustments, Adjusting The Wake Up Times

Manual Time Adjustments

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on time. Even though the SmartSet® sets the time by itself, you still have the option of adjusting the time manually if you wish.

To manually adjust the time display depress and hold the TIME button, and press

either the or buttons to adjust the time display ahead or back as desired.

Each press of the or buttons will change the display by one minute. If you

hold the or buttons the display will continue to change. The display will

change slowly at first, one minute at a time. But if you continue holding the or

buttons the display will change rapidly.

Note:If you manually adjust the time, your new setting is entered into the SmartSet® memory. If the power is interrupted, the display will return to your new setting, not the original setting, when the power is restored.

Adjusting The Wake Up Times

Your SmartSet® clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2.

1.) Depress and hold either the ALM 1 or ALM 2 setting button. The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time.

2.) While holding the ALM 1 or ALM 2 setting button, depress either the or

button to move the display ahead or back to your desired wake up time.

3.) When the desired wake up time appears on the display, release the or buttons.

Note: Be sure that you have set the wake up time correctly by observing the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If the AM indicator is ‘Off’, the wake up time is “PM”.

4.) When the desired wake up time (AM or PM) appears on the display, release the ALM 1 or ALM 2 setting buttons.

1 4