Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired.
Note: Programming can only be done while the player is in the Stop mode. If a disc is playing press the STOP 
button to stop playback before performing the programming steps below.
1.) Turn the unit ‘On’, select the CD function and load the desired disc in the player. Wait until the player reads the disc and the display shows the total track number.
2.) Press the PROGRAM button. The PROGRAM indicator flashes and the display shows “P01”indicating that you can select the first track to be programmed.
3.) Press the 
or 
buttons to select the first track. When the desired track number appears on the display press the PROGRAM button again. The selected track is entered in program memory number 1 and the display advances to
“P02”.
4.) Press the 
or 
buttons to select the next track to be programmed, and press the PROGRAM button to enter that track in the memory.
5.) Repeat step 4 to program up to 20 tracks in the memory.
6.) After you have programmed all the desired tracks press the PLAY/PAUSE 
button to begin programmed playback. The PROGRAM indicator stops flashing and remains ‘On’. Playback will begin on the first track you programmed and continue until all programmed tracks have been played.
13
CKD3810_ib.p65 | 13 |
18/3/2002, 14:10