LISTENING TO THE RADIO
1.) Slide the CD/RADIO selector switch, located on the top cabinet, to the RADIO position.
2.) Press the STANDBY/ON 
button on the front panel or the remote control (model CKD2330 only) to turn the system ‘On’. The Standby indicator goes off and an AM or FM radio frequency appears on the display.
3.) Select the desired band – AM, FM, or FM ST. – by sliding the Band selector, located on the right side, to the appropriate position.
4.) Tune to the desired station by slowly rotating the TUNING control on the right side. The digital frequency display will move up or down the band as you rotate the tuning control. If you tune to an FM Stereo station the (((ST))) indicator will appear in the display.
Note: This is a manual tuning radio with a digital frequency display. Slowly rotate the TUNING control until you find the best reception, even if the display does not indicate the exact frequency of the station.
5.) Press the VOLUME + or – buttons on the front panel or the remote control (model CKD2330 only) to adjust the volume to the desired level.
6.) When you are finished listening press the STANDBY/ON 
button on the front panel or the remote control (model CKD2330 only) to return the system to the Standby (Power ‘Off’) mode. The Standby indicator comes ‘on’again and the display changes from radio frequency to correct time.
16
CKD2328_2330_B091103.p6516
11/9/2003, 14:51