5.To stop the radio sooner, press the Alarm 1 (Alarm Reset) button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day.
6.If you do not want the alarm to turn the radio on the following day, set the appropriate Alarm selector to the ‘Off’position.
WAKE TO BUZZER
1.Reconfirm the wake up time settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.
2.Set the Alarm selector switch for one or both alarms to the Buzzer position. The appropriate Alarm 1 and/or Alarm 2 indicators will light up to confirm that the alarms are set.
3.At the selected wake up time the buzzer will sound. It will continue for one hour and then shut off automatically.
4.To stop the buzzer sooner, press the Alarm 1 (Alarm Reset) button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day.
5.If you do not want the alarm to turn the buzzer on the following day, set the appropriate Alarm selector to the ‘Off’position.
RADIO AND BUZZER OPERATION
You may also set one alarm for wake to radio and the other for wake to buzzer. Just set the Alarm 1 and Alarm 2 selector switches to the desired positions.
SNOOZE ALARM
After the radio or buzzer alarm sounds in the morning you may press the Snooze Bar for a few more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on again. You may repeat the Snooze operation up to seven times if desired, but after the seventh time the alarm will not turn on again.
Note: Whenever the Snooze Bar is depressed the display changes from normal time to a “minutes and seconds” display. The minute will be the last digit that appeared in the time display, and the seconds will continue to advance. When the Snooze bar is released the display returns to the correct time.
9
CK5051_ib_Rev.p65 | 9 |
17/12/2001, 10:51