OPERATING INSTRUCTIONS
SETTING THE CLOCK
When you connect the radio to your AC outlet for the first time, the display will begin flashing “12:00” PM (Noon). The flashing will stop when you set the time.
1.) Press and release the TIME button. The display will stop flashing and you can now proceed to set the clock.
2.) Depress the TIME button together with either the FWD 
or REV 
buttons for at least two seconds to move the display forward or backward to the correct time. The display will move rapidly forward or backward as long as the buttons are depressed.
3.) When the display approaches the correct time release the FWD 
or REV 
buttons and then repeatedly press the FWD 
or REV 
buttons to move display forward or backward, one minute at a time, until the correct time appears on the display.
AM indicator
Note: Observe the AM indicator to make sure you have set the clock to the correct hour, AM or PM. If the AM indicator is ‘On’the time displayed is AM. If the AM indicator is ‘Off’the time displayed is PM.
7
CK5250_ib043003.p65 | 7 |
30/4/2003, 16:29