QUICK REFERENCE (CONTINUED)
TO LISTEN TO THE RADIO:
1.Slide the Function switch to the ON position to turn the unit on; the AM or FM indicator will light.
2.Slide the Band switch to select AM or FM.
3.Tune a station by rotating the Tuning control until the desired frequency is shown at the top of the dial.
4.Adjust the volume using the Volume control .
5.Slide the Function switch to the OFF position to turn the unit off.
TO TURN THE STAR LIGHT ON/OFF:
1.To turn the star light on, press the Star Light button; the star light will then light from dim to bright repeatedly on the castle top.
2.To turn the Star light off, press the Star Light button again.
TO SET OR RESET THE ACTUAL TIME:
1.Press and hold the TIME SET button; the Time indicator ( 
) and the display will blink.
2.While holding the TIME SET button, press the HOUR button to set the hour and/or MIN button to set the minute of the time. Make sure the appropriate AM/PM indicator is lit.
3.Release the TIME SET button and the time will be set.
TO SET OR RESET THE ALARM TIME:
1.With the Function switch in the ON, AUTO or BUZZ position, press and hold the ALARM SET button; the display will blink.
2.While holding the ALARM SET button, press the HOUR button to set the hour and/or MIN button to set the minute of the alarm time. Make sure the appropriate AM/PM indicator is lit.
3.Release the ALARM SET button. After 4 seconds, the display will show the actual time and the alarm time will be set.
TO SET THE ALARM TO WAKE TO RADIO:
1.Set the alarm time as instructed above. Select a radio station and make sure the Volume control is set as desired.
2.Slide the Function switch to the AUTO position and the Radio Alarm indicator ( 
) will light. When the actual time matches the selected preset alarm time, the radio will automatically turn on for nearly one hour then turn off again.
3.Press the ALARM SET button to turn off the alarm and set it again for the next day. Slide the Function switch to the OFF position to turn off the alarm and not set for the next day.
TO SET THE ALARM TO WAKE TO DISNEY ALARM:
1.Set the alarm time as instructed above.
2.Slide the Function switch to the BUZZ position and the Buzzer Alarm indicator ( 
) will light. When the actual time matches the selected preset alarm time, the buzzer will automatically turn on for nearly one hour then turn off again.
3.Press the ALARM SET button to turn off the alarm and set it again for the next day. Slide the Function switch to the OFF position to turn off the alarm and not set for the next day.
Disney Elements © Disney
2